Using Sodium Humate and Desulfurization Gypsum to Improve Saline Water Irrigation for Better Soil Water Movement and Salt Balance in Saline-Alkali Soils

Saline water irrigation has emerged as a promising approach to mitigate agricultural water shortages; however, its improper use may induce secondary soil salinization. In this study, saline-alkali soil collected from Hami, Xinjiang, was used to conduct a series of indoor one-dimensional vertical soil column experiments. The aim was to systematically investigate the effects of sodium humate and desulfurization gypsum on soil infiltration behavior and the distribution patterns of key cations and anions under different levels of irrigation water salinity. The results showed that sodium humate application markedly improved soil infiltration capacity, while the duration of infiltration decreased with increasing salinity. Under salinity levels of 12 and 16 g/L, the 4 g/kg sodium humate treatment exhibited the most rapid advancement of the wetting front. In contrast, desulfurization gypsum reduced infiltration rates, with the lowest infiltration observed under the 12.5 g/kg treatment at 16 g/L salinity. Under different treatments, the adjusted coefficients of determination (adjusted R2) for the Philip, Kostiakov, and Horton models ranged from 0.8450 to 0.9841, 0.9901 to 0.9989, and 0.9748 to 0.9942, respectively, while the global performance indicator (GPI) ranged from 1.619 × 10−3 to 5.103 × 10−1, 4.998 × 10−9 to 2.166 × 10−5, and 1.505 × 10−6 to 2.438 × 10−4, respectively. These results indicate that the Kostiakov model outperformed the other models in terms of fitting accuracy and overall performance for describing the soil infiltration process. In addition, sodium humate generally increased the sorptivity parameter S in the Philip model and the empirical coefficient K in the Kostiakov model, whereas desulfurization gypsum showed the opposite trend. In terms of salt regulation, sodium humate demonstrated optimal desalination performance at application rates of 6–8 g/kg under low salinity and 4–6 g/kg under high salinity conditions. Conversely, excessive gypsum application tended to exacerbate salt accumulation, although a moderate dosage (5 g/kg) effectively limited the downward migration and accumulation of Na+ and Cl−. These two ions were identified as the dominant contributors to soil salinization, showing strong positive correlations with soil salt content (SSC), sodium adsorption ratio (SAR), and exchangeable sodium percentage (ESP). In contrast, Ca2+, Mg2+, and HCO3− played beneficial roles in alleviating sodicity through ion exchange and buffering mechanisms. Overall, sodium humate enhanced infiltration and facilitated salt leaching in the upper soil layers under saline irrigation conditions. Although desulfurization gypsum reduced infiltration and increased overall salt content, it contributed to mitigating Na+ accumulation in deeper soil profiles. These findings highlight the critical importance of selecting appropriate soil amendments and optimizing their application rates to improve saline water use efficiency and promote sustainable management of saline-alkali soils.