Selective Sorption of Molybdenum (VI) from Strongly Acidic Sulfate Media Using Macroporous Weak-Base Anion-Exchange Resins

Depletion of reserves of rich copper–porphyry ore deposits necessitates the development of highly efficient methods for Mo (VI) extraction from complex, corrosive hydro-metallurgical media. The present study undertakes a comprehensive assessment of sorptive concentration of Mo (VI) from strongly acidic sulfate solutions (120 g/L H2SO4) by employing a spectrum of commercially available strong- and weak-base anion-exchange resins. It has been established that the macroporous weak-base anion exchanger Purolite A-100 demonstrates decisive superiority over gel-type analogs (Lewatit M-800, AB-17), facilitating unimpeded intra-gel diffusion of bulky molybdenyl sulfato-complexes anions, thereby circumventing the obstructive “sieve effect.” Thermodynamic and kinetic investigations revealed that the sorption process exhibits pronounced concentration- and pH-dependent characteristics. Peak extraction efficiency (up to 95.91%) is achieved at pH ≈ 1, a finding that correlates with the region of maximal protonation of tertiary amino groups within the resin matrix. Kinetic acceleration of mass transfer upon heating to 80 °C has been experimentally confirmed, yielding 94.6% extraction within 60 min. The obtained results corroborate the prospective integration of macroporous weak-base anion exchangers into operational hydro-metallurgical schemes as an environmentally benign and efficacious alternative to conventional solvent extraction of molybdenum.