Thermal Depolymerization Challenges of PTFE:Silicone Rubber Mixtures and Composite Materials.

Thermochemical depolymerization of polymer mixtures and composite materials is challenging due to non-additive degradation behavior and the emergence of new reaction pathways during pyrolysis. Both polytetrafluoroethylene (PTFE) and silicone rubber (SR) can depolymerize into monomers or low-molecular-weight oligomers when pyrolyzed individually, making them, in principle, suitable candidates for depolymerization-based recycling. Because they are frequently combined in technical applications and composites, their behavior during co-pyrolysis warrants investigation. However, the pyrolysis of PTFE:SR mixtures and composites remains poorly understood. In this study, we examine the pyrolysis behavior of PTFE:SR systems with emphasis on mass balance, product composition, and the formation of new species to address potential limitations for depolymerization-based recycling. Experiments were conducted on virgin PTFE and SR, defined polymer mixtures, and commercially relevant composites, including PTFE-lined silicone tubing and PTFE:SR septa. The results reveal a pronounced, non-linear dependence of product distribution on PTFE content. Product identification by GC-MS, NMR, and FTIR indicates cleavage of Si-O and Si-CH3 bonds and the formation of fluorinated siloxanes as well as new per- and polyfluoroalkyl substances (PFAS). At low PTFE contents, liquid products are dominated by cyclic siloxanes (Dx). These findings show that depolymerization strategies developed for pure polymers cannot be directly applied to PTFE:SR composites. While systems with low PTFE content may be more amenable to depolymerization, higher PTFE fractions promote the formation of PFAS and difficult-to-valorize fluorinated silicon species. These products complicate selective monomer recovery and could pose significant challenges for the depolymerization-based recycling of PTFE-rich composites.