Loofah-Inspired Hierarchical Omniphobic Membrane for Efficient Dissolved Gas Extraction.

To address the persistent challenge of membrane wetting during oil-gas separation in transformer condition monitoring, an omniphobic composite membrane was developed to facilitate the reliable online detection of dissolved gases. An F-CNTs/Teflon AF/PVDF composite membrane, featuring a loofah-like hierarchical structure and omniphobic properties, was fabricated via spraying-deposition strategy on the polyvinylidene fluoride (PVDF) substrate. The morphology, surface chemical composition, wettability and stability of the F-CNTs/Teflon AF/PVDF composite membrane were systematically characterized. Subsequently, the oil-gas separation performance of the composite membrane was evaluated using standard transformer oil containing dissolved gases as the feed solution. The results indicated that fluorinated carbon nanotubes (F-CNTs) were successfully modified onto the membrane surface, creating a re-entrant morphology composed of an intersecting nanotube network that mimics the hierarchical architecture of a loofah. The F-CNTs/Teflon AF/PVDF composite membrane exhibited exceptional omniphobicity, achieving contact angles of 168.2 ± 1.5° and 127.5 ± 1.0° towards DI water and mineral insulating oil, respectively. Additionally, the loofah-inspired composite membrane demonstrated robust thermal and ultrasonic stability. In oil-gas separation tests, the omniphobic membrane displayed a rapid response and high efficiency for dissolved gas extraction, achieving dynamic equilibrium within 64 min. Furthermore, the modification improved permeation efficiency by 25.6%. These results suggest that the developed omniphobic membrane is a promising alternative for oil-gas separation in the condition monitoring of oil-filled electrical equipment.