Hydroxypropyl Cellulose as an Effective Binder for Low-Temperature Screen-Printed Porous Carbon Counter Electrodes for Indoor Dye-Sensitized Solar Cells.

The development of indoor photovoltaic devices for powering Internet of Things (IoT) sensors requires low-cost and sustainable components, making dye-sensitized solar cells (DSSCs) an ideal candidate for artificial light harvesting. The counter electrode plays a critical role in transferring electrons and catalyzing the reduction in the redox electrolyte. However, the traditional use of expensive and scarce platinum (Pt) limits the cost-effective, large-scale commercialization of these devices. While carbon-based materials offer a highly porous, conductive, and abundant alternative, commercial carbon pastes frequently require energy-intensive high-temperature sintering. In this study, we propose a sustainable, low-temperature, and screen-printable carbon composite counter electrode (LoT-HPC) using bio-derived hydroxypropyl cellulose (HPC) as a highly effective binder. Rheological characterizations confirm that the formulated LoT-HPC ink possesses an ideal shear-thinning profile and rapid structural recovery, ensuring excellent printability and film homogeneity. By comparing the custom LoT-HPC composite against a commercial high-temperature screen-printed graphite paste (HT-Elco) and a standard sputtered Pt-FTO electrode, we demonstrate the structural and electrocatalytic advantages of this material. When integrated into full DSSC devices and evaluated under low indoor illumination (1000 lux), the LoT-HPC cell delivers a power conversion efficiency (PCE) of 14.8% and a high short-circuit current density of 103.9 µA cm-2. Furthermore, the custom device demonstrated exceptional operational stability, retaining 98.6% of its initial efficiency (from 14.8% to 14.6%) after 200 h of continuous light-soaking and J-V cycling under 1000 lux. Ultimately, the successful implementation of the HPC binder enables the low-temperature fabrication of sustainable carbon counter electrodes without the need for energy-intensive thermal treatments, presenting a highly scalable pathway for indoor DSSC manufacturing.