Evaluation of a Series-Type Mount Structure for Electric Vehicle Suspension System

This paper evaluates a novel series-type suspension mount designed for electric vehicles (EVs), in which the spring and damper are arranged in series rather than in a conventional parallel configuration. This structurally simple yet innovative design avoids the need for additional mechanical components, such as inerters or costly active devices, while effectively mitigating vibration. Comparative quarter-car simulations demonstrated that the series-type configuration provided a faster reduction in transmissibility across the analyzed frequency range, highlighting its superior isolation capability compared to conventional mounts. An extended series-type model was also investigated by incorporating auxiliary sub-mount elements to assess the parametric effects. The results showed that damping variations had a limited influence, whereas the sub-mount stiffness played a decisive role in shaping the transmissibility curves and generating the secondary resonance behavior. To validate the concept experimentally, a prototype consisting of four coil springs and a vibration isolation pad was prepared and tested using impact-hammer excitation. The measured transmissibility confirmed improved vibration isolation up to 100 Hz under the given specimen conditions, with resonance features attributable to the inherent stiffness of the isolation pad. Overall, the findings verified that a simple series-type mount can provide efficient and practical vibration isolation tailored to EV applications.