Artur Kurnyta, Klaudia Wrąbel, Marta Baran, Andrzej Leski
The following paper aims to provide the results of an innovative structural crack detection technique using printed adaptive sensors. They were manufactured using conductive ink with silver microparticles and polymer insulators. The technique leveraged the unique properties of Direct Ink Write additive manufacturing combined with domain knowledge in the field of technical condition monitoring. The goal was to achieve high sensitivity and precision in detecting fatigue-crack-induced changes in structural components. The sensors' fabrication repeatability, output stability, and crack detection capabilities were investigated. Based on preliminary measurements of the sensors' output characteristics, the analyzed data showed that a tolerance in the range of 5% can be obtained for batch production. Damage size estimation using this new crack gauge during a fatigue crack growth test was high compared to the reference, with less than 1 mm precision over 30 mm of crack length. Throughout the fatigue test of up to 1.5 million cycles, all CCPSs remained fully functional, with no failure-related changes in their output signal patterns. The proposed sensor has proven its reliability for the detection of fatigue cracks and propagation monitoring and is a good alternative to other SHM technologies for this purpose.