Coagulation, and Flocculation of Cadmium Using Functionalized Sugarcane Bagasse CNC-PVA-ZnOFe Beads

Cadmium contamination of water resources represents a serious environmental and public health challenge, with conventional treatment methods often proving inadequate for industrial-level remediation. In this study, we present a novel, sustainable composite material, functionalized cellulose nanocrystal polyvinyl alcohol zinc oxide ferric chloride (CNC-PVA-ZnOFe) beads for the efficient removal of cadmium from contaminated water. The material integrates adsorption, coagulation, and flocculation mechanisms within a single hybrid platform, with coagulation–flocculation serving as the dominant mechanism given the material’s macroporous structure and limited surface area (1.2–3.3 m2/g). Functionalized cellulose nanocrystals provide supporting adsorptive sites for metal binding, while a PVA matrix incorporating ZnOFe improves structural integrity, mechanical stability, and coagulation performance. Characterization confirmed successful functionalization, enhanced thermal stability, and a macroporous structure (12–52 nm pores) conducive to floc entrapment, though with limited surface area (1.2–3.3 m2/g) for conventional adsorption. Under optimized conditions (pH 7–10, initial Cd2+ concentration of 100 mg/L, coagulant dose of 0.1 g, and sedimentation time of 60 min), the functionalized CNC-PVA-ZnOFe beads achieved a cadmium removal efficiency of 78%, achieving significantly higher cadmium removal efficiency than traditional coagulants, such as aluminum sulfate (69%). The beads also demonstrated good reusability, retaining 85% removal efficiency after five regeneration cycles. This work presents a scalable, eco-friendly material for cadmium removal under controlled laboratory conditions using synthetic solutions. However, further evaluation in real wastewater matrices containing competing ions and organic matter is necessary to establish practical applicability for water treatment applications. The study highlights the combined potential of multifunctional hybrid materials while acknowledging the need for validation under environmentally relevant conditions. While the results indicate successful integration of multiple removal mechanisms, direct validation of synergistic interactions through techniques such as zeta potential and XPS analysis remains an important direction for future research.