Enhancing Interlayer Properties and Sustainability of 3D-Printed UHPC with Antimony Tailings

This study investigates the interlayer properties and sustainability of 3D-printed ultra-high-performance concrete (UHPC) modified with antimony tailings (ATs). The different AT ratios considered were 2.7, 5.4, 8.1, 10.8, and 13.5 wt% additions. The mechanical experiments show the optimal concentration resulting in compressive and flexural strength of 11.2% and 17.2% enhancement at 28 days, respectively. SEM analysis revealed that AT enhances the interlayer strength of 3D-printed UHPC and influences the anisotropic behavior of the matrix around steel fibers. X-CT demonstrated that increasing the AT from the compared group to 13.5% reduced the pore volume from 2.02% to 0.30%. Furthermore, an environmental impact assessment of the 10.8 wt% AT exhibited a 32.5% reduction in key indicators including abiotic depletion (ADP), acidification potential (AP), global warming potential (GWP), and ozone depletion potential (ODP). Consequently, UHPC incorporating AT offers superior environmental sustainability in the practical construction of 3D-printed concrete. This research provides practical guidance in optimizing 3D-printed UHPC engineering, further facilitating the integrated design and manufacturing of multi-layer structures.