Flow Characteristics of Unclassified Tailings Backfill Slurry and Optimization of Roof-Contact Backfilling Scheme.

Roof-contact backfilling is a critical determinant of stope stability in cut-and-fill mining, and the rheological properties of backfill slurry decisively influence the quality of roof contact. To investigate the flow characteristics of unclassified tailings backfill slurry and their effect on rheological parameters, this study uses the Daye Iron Mine as its engineering case. It adopts a combined laboratory and numerical simulation approach. The physicochemical characteristics of the unclassified tailings and the rheological behavior of the slurry were systematically characterized using particle-size analysis, density measurements, spreadability tests, and rheometer measurements. Subsequently, a numerical model of the L-type flow tester was developed in COMSOL Multiphysics (6.4) to simulate the flow process at varying concentrations. Based on the simulation results, a Gaussian process regression (GPR)-based inversion model for rheological parameters was proposed, and the predictive performance of different kernel functions was compared and evaluated. Finally, the existing backfilling scheme at the Daye Iron Mine was optimized based on the obtained rheological characteristics to improve the roof-contact rate. The results indicate that the unclassified tailings from the Daye Iron Mine have a median particle size of 12.1 μm and a density of 2855 kg·m-3, with CaO, Al2O3, and MgO as the primary active components. Under the same cement-to-tailings ratio, slurry flowability decreases markedly with increasing concentration. The rheological curves exhibit three stages, with the third conforming to the Bingham model; both yield stress and viscosity increase exponentially with concentration. Evaluation of the inversion results demonstrates that the GPR model with the Rational Quadratic (RQ) kernel achieves optimal performance. The recommended slurry concentration for the Daye Iron Mine is determined to be in the range of 69-71%, and the recommended spacing between filling pipelines is 13.34-18 m. This study reveals the flow evolution patterns of unclassified tailings backfill slurry, demonstrates the potential of the GPR-based inversion approach, and optimizes the roof-contact backfilling scheme, offering a scientific reference for flow characterization and backfill optimization in analogous mining operations.