F. Sahin, Gökhan Şahin, Ahmet Koç, Erdal Akin
This study evaluates the environmental performance of 34 single-engine light utility helicopters across five operational phases: ground idle departure, ground idle arrival, takeoff, approach, and landing-takeoff (LTO). A hybrid multi-criteria decision-making (MCDM) framework integrating interval type-2 fuzzy sets with the Analytic Hierarchy Process (AHP), VIKOR, and TOPSIS was applied to ensure robust and reliable assessment. Six criteria: shaft horsepower (SHP), fuel flow, hydrocarbon (HC), carbon monoxide (CO), particulate matter (PM), and nitrogen oxides (NOx) were considered to capture both engine performance and environmental impact, with relative importance determined through AHP. VIKOR generated a compromise ranking, while TOPSIS validated the results. The analysis revealed that the HUGHES 500 (DDA250-C18, A34), HUGHES 501 (DDA250-C20B, A29), and BELL 206B-1 (DDA250-C20, A32) engines achieved the best environmental performance due to low fuel consumption and reduced emissions across NOx, PM, HC, and CO. In contrast, engines such as K-1200 (T53 17A-1, A1) and BELL UH-1H (T53 L13, A2) performed the poorest, with high fuel flow and elevated emissions. Sensitivity analysis showed minimal changes in rankings when the NOx weight was varied, confirming the robustness of the framework. These results highlight that emissions and fuel efficiency are more critical than engine power in determining environmental sustainability.