Experiments and Simulations on the Factors Governing Fast Transient Responses in Cavity Discharge

Experimental investigations and datasets in the open literature remain scarce for the fast transient response of air systems induced by sudden internal structural failures, hindering rigorous experimental validation of the governing trends associated with multiple influencing factors. To address this gap, we establish a fast transient air-system test platform and develop a step boundary simulation device based on mechanical energy storage, enabling rapid and repeatable boundary transients. The experiments demonstrate that the minimum boundary-change time is less than 6 ms, satisfying the simulation requirement for boundary transients associated with typical sudden structural failures (≤10 ms). Guided by a dimensionless analysis, we conduct fast transient cavity-venting experiments under varying outlet areas, cavity geometric parameters, and initial pressure ratios, thereby obtaining the transient response data of the cavity pressure. In parallel, we simulate the test process using a three-dimensional numerical approach validated against the experiments; by combining experimental and numerical results, we systematically analyze the effects of key factors on the fast transient response during cavity venting and elucidate the underlying mechanisms. This paper provides experimentally validated data and a reliable experimental methodology for studying fast transient response processes in air systems, and it supports the passive safety design of aero-engines.