Multi-Sensor Mobile Laser Doppler Vibrometry for Internal Damage Detection in Reinforced Concrete Structures.

Reinforced concrete structures are critical components of modern infrastructure, and the detection of internal damage within these structures has long been an important research topic. These damages can be detected using the vibration response of the structures, and laser Doppler vibrometry (LDV) on a moving platform offers an efficient, long-range sensing approach for structural vibration monitoring. However, extending LDV-based damage detection from static to mobile measurement requires addressing the effects of measurement signal frequency shift, platform vibrations, and speckle noise. To address these issues, this paper proposes a mobile measurement damage detection framework that integrates multi-source information with artificial intelligence algorithms. First, theoretical derivation and numerical simulation demonstrate that the vibration frequency shift induced by moving speed is negligible, proving that mobile and static measurement signals are similar in both time and frequency domains. Then, a multi-sensor data processing framework is used to decouple the platform vibration and suppress speckle noise. Finally, a spatial-aware CNN network is employed to achieve damage detection under mobile measurement. The results reveal that the vibration signals for large-scale voids were effectively recovered, whereas signals for small-scale voids and healthy regions were only partially recovered. Voids with a tested size of 0.4 m and larger were successfully identified under the experimental conditions. The results demonstrate the feasibility of extending static LDV-based void detection to mobile measurement, providing a theoretical and technical basis for efficient, non-contact mobile inspection of infrastructure.