Technoeconomic Analysis of a Microwave-Assisted Novel Process That Converts Polypropylene Plastic Waste to Propylene

High Resolution Image Download MS PowerPoint Slide Propylene is an important petrochemical that is used in various industries, including the automobile and polymer sectors. Conventionally, propylene has been produced through fluid catalytic cracking, steam cracking, and propane dehydrogenation. In this project, a novel process to produce propylene from polypropylene plastic waste using a microwave reactor is introduced. Propylene production is simulated in Aspen Plus for both the conventional propane dehydrogenation process and the novel design, with heat integration applied to minimize utility demands and the conventional process serving as the base case for comparison. Finally, a tailored technoeconomic analysis is carried out for both simulated cases to estimate important economic indicators. Analysis of the results shows that the novel microwave-assisted process outperforms the conventional route for propylene production, achieving a single-pass conversion of almost 100%, compared with only 33.8% in the conventional plant. The Net Present Value of the novel plant is $1720.3 MM, which is 3.5 times higher than the conventional process, while the Levelized Cost of Propylene is reduced by 40%. Capital and operating expenditure are also improved in the proposed scheme, with reductions of approximately $29 MM and $222 MM/yr, respectively. In addition to cost savings, this novel process also provides a convenient means to recycle waste polypropylene.