Electrochemical Evaluation of Polymer-Based Microelectrode Arrays: Analytical Performance on Oxygen and Hydrogen Peroxide.

This study investigates the electrochemical properties of polymer-based microelectrode arrays (pMEAs) and their performance in measuring oxygen (O2) and hydrogen peroxide (H2O2). Morphological characterization by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD) revealed a uniform, fine-grained platinum surface with nanoscale roughness, consistent with the Ti/Pt/Au/Pt multilayer stack architecture. The electrochemical behavior of the pMEAs was assessed using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), which demonstrated favorable responses for both O2 reduction and H2O2 oxidation, together with low impedance (41.1 kΩ at 1 kHz). For O2 detection, amperometric measurements at -0.6 V vs. Ag/AgCl indicated a sensitivity of -0.25 ± 0.04 nA μM-1 and a detection limit of 5.4 ± 1.4 nM. For H2O2 detection, application of +0.7 V vs. Ag/AgCl resulted in a sensitivity of 88.13 ± 7.61 nA mM-1 and a detection limit of 41.9 ± 5.6 nM. Selectivity evaluation showed effective interferent exclusion following m-phenylenediamine electrodeposition, without compromising analytical performance. Overall, these findings indicate the suitability of pMEAs for real-time, in vivo monitoring of O2 and H2O2 in brain tissue with high spatial and temporal resolution, supporting applications in oxidative stress research and neurometabolic sensing.