Effect of Corrosion Inhibitor on Properties and Microstructure of Self-Compacting Concrete.

The premature deterioration of reinforced concrete structures caused by steel reinforcement corrosion remains a major challenge to long-term structural durability. This study systematically investigates the effects of corrosion inhibitor dosage on the fresh properties, mechanical performance, chloride ion penetration resistance, and capillary water absorption of self-compacting concrete (SCC). The evolution of the pore structure is characterized using low-field nuclear magnetic resonance (LF-NMR) and X-ray computed tomography (X-CT), and the proportions of pores within different equivalent spherical diameter ranges are quantified. In addition, the microstructural characteristics are examined by scanning electron microscopy (SEM). The results show that the incorporation of the corrosion inhibitor increases the viscosity of fresh SCC, resulting in reductions in slump. In general, the corrosion inhibitor reduces both the compressive strength and splitting tensile strength of SCC, with the smallest strength reduction observed at a corrosion inhibitor dosage of 2 wt%. All mixtures containing the corrosion inhibitor exhibit lower electric flux and water absorption than the control mixture, indicating improved resistance to chloride ion penetration and capillary water ingress. The combined LF-NMR, X-CT, and SEM results indicate that an appropriate corrosion inhibitor dosage may optimize the spatial distribution of hydration products, refine the pore structure, reduce total porosity, and suppress the formation of macropores. Overall, a dosage of 2 wt% provides the most favorable balance among workability, mechanical properties, durability, and microstructural compactness. These findings provide experimental support and technical guidance for the mixture design of durable SCC used in aggressive environments, including marine and salt-lake regions.