科研速览 · Science Skim继续刷下去 · Keep skimming →
◆ Chemical Engineering Journal2025-10-28· Photocatalysis

Optimizing divalent metal composition in layered double hydroxides for sustainable NO photocatalytic removal

Laura Marín, Philip Kenyon, Dermot O’Hare, F. Martı́n, Ivana Pavlović, Luis Sánchez, Adrián Pastor

原始摘要(英文原文)· Original abstract
The presence of nitrogen oxides (NO x ) in urban areas has adverse effects on both human health and the environment, but efficient and affordable photocatalytic elimination of NO x represents a challenge. In this study, we investigated a series of Aqueous Miscible Organic Solvent Treatment Layered Double Hydroxides (AMO-LDHs), Zn x (Mg 3 − x )Al-CO 3 AMO-LDHs (0 ≤ x ≤ 3), for the photocatalytic removal of gaseous NO x from air (DeNO x process). Considering that zinc is an “endangered element” where projected demand is far greater than known reserves, the aim was to identify a sustainable, low-cost material with promising photocatalytic properties by modifying the Mg/Zn ratio. The LDHs were prepared using a simple co-precipitation method followed by Aqueous Miscible Organic Solvent Treatment (AMOST). All the samples exhibited uniform metal distribution without impurities. Incorporation of Zn into the AMO-LDH structure increased the nanosheet thickness and reduced their aggregation, resulting in slight morphological changes. It also influenced the positions of the valence and conduction bands, thereby affecting the photochemical mechanism. Among the studied compositions, Zn 0.5 Mg 2.5 Al AMO-LDH showed the most promising performance for NO x removal, offering NO x removal efficiencies of 51 %, low NO₂ formation with outstanding selectivity (up to 93 %) and significantly enhanced efficiency compared to Mg 3 Al AMO-LDH or commercial ZnO. Furthermore, this sample exhibited exceptional stability and reusability, maintaining its photocatalytic efficiency throughout the repeated cycles, highlighting its potential for practical DeNO x application. • First report on Zn x (Mg 3–x )Al LDHs as DeNO x photocatalysts • Optimal Zn 0.5 Mg 2.5 Al achieves 51 % NO x removal. • Zn 0.5 Mg 2.5 Al shows excellent selectivity (91 %) and stable cyclability. • Zn 0.5 Mg 2.5 Al outperformed commercial ZnO even under long irradiation tests (24 h). • ·OH radicals are responsible for the observed photocatalytic results.
读原文 · Read the paper ↗

AI 追问PRO

登录后使用 AI 追问

讨论区

登录后参与讨论

相关论文 · Related

Optimizing divalent metal composition in layered double hydroxides for sustainable NO photocatalytic removal — 科研速览 Science Skim