Mehmet Sah Gultekin, Cüneyt Özdemir
ABSTRACT Fused Deposition Modeling (FDM) enables manufacturing of complex geometries, but flexural strength of printed parts is highly sensitive to process parameters. This study investigated five key factors—printing speed (PS: 100–150 mm/s), infill density (ID: 50–100%), layer height (LH: 0.20–0.30 mm), wall thickness (WT: 0.8–1.6 mm), and nozzle temperature (NT: 175°C–225°C)—to optimize the flexural strength of PLA specimens. A Taguchi L27 orthogonal array was employed to capture nonlinear effects and parameter interactions more comprehensively than standard designs. Experimental results were analyzed using analysis of variance (ANOVA) and signal‐to‐noise (S/N) ratios. The study found WT and LH to be the most influential parameters, while PS and ID had smaller impacts on flexural strength. Additionally, a regression model was developed to describe the relationship between process parameters and mechanical performance, achieving R 2 = 98.22%, adjusted R 2 = 97.11%, and predicted R 2 = 94.94%. Residual analyses confirmed the model's reliability and absence of overfitting. The optimal parameter combinations identified offer practical guidelines for enhancing flexural strength and reducing variability in FDM‐produced PLA components, supporting efficient and predictable part fabrication.